Electrical Engineering Test Preparation: Practice Questions, FE Exam Topics, and Interview Prep
The Job Tests Portal Electrical Engineering Test covers the four core areas screened in electrical-engineering interviews: circuit analysis, power systems, electronics, and control systems. The bank holds 80+ multiple-choice questions at intermediate to advanced level, a full run takes about 30 minutes, and every answer includes a step-by-step explanation. One worked sample question is free below.
Last updated: October 2026
Master circuits, power systems, and electronics
Electrical Engineering Test: Format and Difficulty
Topic coverage follows the NCEES FE Electrical and Computer specification areas - circuit analysis (DC and AC), power systems, electronics, electromagnetics, control systems, communications, and digital systems - at survey depth, matching university curricula and employer screens.
Which Electrical Engineering Topics Are Tested?
Master these essential areas that employers actively seek
Circuit Analysis
DC/AC circuits, network theorems, impedance
Power Systems
Generation, transmission, distribution, protection
Electronics
Semiconductors, amplifiers, digital circuits
Control Systems
Transfer functions, stability, PID control
How to Practice: A 4-Step Method
Pick Topics
Select circuits, power, electronics, or control systems
Solve Problems
Work through calculations and conceptual questions
Review Solutions
Get step-by-step explanations for each problem
Build Expertise
Track progress and master weak areas
How to Pass an Electrical Engineering Technical Assessment
Master Ohm's Law and Kirchhoff's Laws thoroughly - every screen opens with them
Practice phasor diagrams for AC circuit analysis
Review transformer calculations and efficiency
Understand both series and parallel resonance
Know three-phase relationships (Y-delta, line vs phase) by heart
Estimate first, then calculate - it eliminates most distractors
Try a Free Sample Question
Free sample question - Circuits — worked solution included, no sign-up needed
If the current through a resistor doubles while the resistance stays the same, how does the power dissipated in the resistor change?
Show answer and explanation
Correct answer: D. It quadruples
Power in a resistor is P = I²R. Doubling the current gives (2I)²R = 4I²R, so the power quadruples. The squared-current relationship is one of the most-tested facts in electrical screens because it underpins conductor sizing and protection design.
Who Uses Electrical Engineering Technical Assessments?
Electrical employers screen candidates with technical assessments covering circuit analysis and power fundamentals. Heavy-industry and energy companies such as Siemens, GE, ABB, Schneider Electric, and Rolls-Royce (power systems) test AC/DC analysis, three-phase power, and protection basics for engineering roles.
Automotive and EV employers (Tesla, Bosch, and OEM EV divisions) add battery and power-electronics questions; utilities and grid operators test load-flow and protection fundamentals; and semiconductor and electronics employers probe digital logic and analog basics. Ohm's law, Kirchhoff's laws, and power calculations are the opening questions in nearly every one of those screens.
Electrical Engineering Test FAQ
Four core areas: Circuit Analysis (DC/AC circuits, network theorems, impedance), Power Systems (generation, transmission, distribution, protection), Electronics (semiconductors, amplifiers, digital circuits), and Control Systems (transfer functions, stability, PID). The bank holds 80+ multiple-choice questions at intermediate to advanced difficulty.
Topic coverage follows the NCEES FE Electrical and Computer specification areas - circuits, power, electronics, electromagnetics, controls, communications, and digital systems - at survey depth, so it works as topic-level practice alongside a dedicated FE course.
A full run is designed for about 30 minutes. You can focus on circuits, power, electronics, or controls, or take the full bank; each answer includes an AI-generated step-by-step explanation for immediate review.
Siemens, GE, ABB, Schneider Electric, Tesla, and Bosch include technical screening in electrical-engineering hiring, alongside utilities and grid operators. Screens typically open with Ohm's law, Kirchhoff's laws, and three-phase power calculations.
Yes - the worked sample question on this page is free, no sign-up needed. The full 80+ question bank with explanations and progress tracking starts at $3.99 for 30 days of access.
Yes to both. Digital topics include logic gates, flip-flops, and basic microprocessor concepts, and three-phase power is covered extensively, including Y-delta conversions and power calculations.
Related Engineering Tests
Ready to Test Your Engineering Knowledge?
Start practicing now and ace your technical interviews