⬛ Cognitive & Aptitude

Grid Challenge

Test working memory and spatial reasoning

  • ✓ Working Memory
  • ✓ Spatial Memory
  • ✓ Quick Reasoning
  • ✓ Focus
20+ Questions
15 min Duration
Intermediate Difficulty
Memory & Reasoning Format
$2.99
Selected plan
🎉 Free Sample
Try sample questions with basic feedback — no card required
▼
▼
✓ Instant access after purchase
🔒 Secure SSL-encrypted checkout
💰 Refund & cancellation terms apply

Test Overview

⏱️
Duration 15 minutes
📝
Questions 20+
📊
Difficulty Intermediate
🎯
Format Memory & Reasoning

Skills You'll Develop

Master these essential abilities that employers actively seek

🧠

Working Memory

Hold and manipulate information temporarily

📍

Spatial Memory

Remember positions and sequences

⚡

Quick Reasoning

Answer distractor questions rapidly

🎯

Focus

Maintain concentration under pressure

How It Works

1

Memorization

Watch colored dots appear and remember their positions

2

Distractor Questions

Answer intervening symmetry, rotation and pattern-combination questions.

3

Recall Phase

Click dots in the exact order they originally appeared

4

Progressive Difficulty

Phases increase: 3 dots → 4 dots → 5 dots

What Grid Challenge practice covers

The Grid Challenge is a dual-task exercise. You memorise where a set of dots appeared, you are then interrupted by reasoning questions that have nothing to do with the dots, and only afterwards are you asked to recall the dots in the right order. The interruption is part of the exercise: you have to retain the positions while completing a different task.

Use the practice to learn the sequence of dot display, intervening reasoning and recall. This game does not establish your working-memory capacity or predict performance on an employer assessment. Check your actual invitation for any named tasks and their instructions; a similar-looking exercise may use different rules, scoring and timing.

The format on Job Tests Portal

The current exercise has three phases with 3, 4 and 5 dots. A reasoning question follows each dot before the recall stage. The selected timer or step cap can end the exercise earlier. Read the displayed settings before starting and follow the sequence shown on screen.

  • Phase 1: three dots to remember, with symmetry questions between memorising and recall.
  • Phase 2: four dots, with rotation questions at 90, 180 or 270 degrees.
  • Phase 3: five dots, with pattern addition and subtraction questions.
  • Both halves score: every correctly recalled dot and every correct reasoning answer counts.
  • The run cannot be paused once it starts and ends when the timer expires.

Guest limits can shorten these settings. Read the test limits before starting; practice settings are not employer exam lengths or pass marks.

Question types, with worked examples

1. Symmetry questions (Phase 1)

Worked example — vertical mirror

Two 3x3 patterns are shown side by side. In the left pattern the filled cells are top-left, top-right and centre. Is the right pattern the vertical mirror of the left pattern?

Answer: Yes, if the right pattern is filled at top-left, top-right and centre.

Why: A vertical mirror swaps column 1 with column 3 and leaves column 2 alone. Top-left and top-right swap into each other and the centre does not move, so this particular pattern is its own mirror image. Check the columns that move first; the middle column is only ever a tie-breaker.

2. Rotation questions (Phase 2)

Worked example — 90 degrees clockwise

The left pattern has its only filled cell in the top-left corner. Is the right pattern the 90-degree clockwise rotation of it?

Answer: Yes, if the right pattern's filled cell is in the top-right corner.

Why: Turning a square 90 degrees clockwise sends the top-left corner to the top-right, top-right to bottom-right, bottom-right to bottom-left, and bottom-left to top-left. Track one corner around that cycle rather than rotating the whole picture.

3. Pattern operations (Phase 3)

Worked example — A minus B

Pattern A is filled at the centre and the top-left. Pattern B is filled at the top-left only. Is the bottom pattern equal to A minus B?

Answer: Yes, if the bottom pattern is filled at the centre only.

Why: A minus B keeps the cells that are in A and not in B. Top-left appears in both, so it goes; the centre is only in A, so it stays. For the union question the rule is the opposite: keep every cell that appears in either pattern.

A practice method for the Grid Challenge

  1. Encode positions as a shape, not as a list. Three dots forming a triangle, or four forming a Z, is one item to remember instead of four.
  2. Add a direction to the shape. Order matters at recall, so store the path: “up-left, across, down.” The shape gives you the positions and the path gives you the sequence.
  3. Refresh once before the interruption. Replay the path silently in the moment between the last dot and the reasoning question.
  4. Answer the interruption quickly and deliberately. Rushing it loses the reasoning mark; dwelling on it loses the dots. A confident answer in a few seconds protects both.
  5. Replay the path immediately at recall. Re-run the whole sequence before your first click rather than clicking as each memory surfaces.
  6. Build up the phases. Start with shorter runs so you meet Phase 1 repeatedly, then lengthen the timer once three dots feel easy.

Common mistakes and how to avoid them

  • Memorising positions but not order. Recall is sequential, so a perfect set of positions in the wrong order still costs marks.
  • Treating the reasoning questions as filler. Correct reasoning answers contribute to the score alongside correctly recalled dots.
  • Trying to keep rehearsing the dots while answering the interruption. Divided attention loses both; answer, then rebuild.
  • Starting with the longest run available. The dot count rises with the phases, so long runs put you into five-dot rounds before three-dot rounds are comfortable.
  • Clicking hesitantly at recall. Replaying the full path first is more reliable than reconstructing it dot by dot under time pressure.
  • Practising without a quiet setting. Choose a place where you can follow the dot displays, reasoning questions and recall instructions.

Where to go next

Tips for Success

💡

Create a mental pattern or story for dot positions

💡

Don't rush the reasoning questions - they're designed to distract

💡

Use practice to learn the dot-display and recall sequence

💡

Start with shorter durations to build confidence

Frequently Asked Questions

Phase 1 has 3 dots with symmetry questions, Phase 2 has 4 dots with rotation questions, Phase 3 has 5 dots with addition/subtraction.
Each correct dot position and each correct reasoning question contributes to your score.
No, the test cannot be paused once started and will end automatically when time expires.
Yes. Recall asks for the dots in the order they first appeared, so the sequence is part of the answer.
The run ends when the timer expires and everything you completed up to that point is scored. Rounds are short, so little is usually lost.

Ready to Get Started?

Practise under realistic timing, review every answer, and see which question types you find hardest.

✓ Added to cart!